 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF9001/1220.0/QCC8B is a low-loss, compact and economical" surface wave acoustic" (SAW) RF filter in an SMD QCC8B package for Digital Set Top Box applications. 1.Package Dimension (QCC8B) 2. Pin 1,2 5,6 3,7 4,8 Configuration Input Output To be grounded Case Ground Sign A B C Data (unit: mm) 1.00 1.27 0.60 Sign D E F Data (unit: mm) 1.50 3.80 3.80 3. Matching Circuit No matching network required for operation at 200 In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 1 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4. Typical Frequency Response 5.Performance 5-1.Maximum ratings Rating Input Power Level DC Voltage Operable temperature range Storage temperature range Value 0 0 -40 to +85 -40 to +85 Units dBm V C C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 2 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2.Electronic characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = -40 c... +85 c ZS= 200 ZL = 200 Characteristic Centre Frequency Maximum insertion Loss (4MHz) Ripple in passband (4MHz) Attenuation Min. fC IL max 3.5 Typ. 1220.0 4.7 0.8 Max. Units MHz 5.8 1.5 dB dB rel 500.00 .... fc-91.00 MHz fc-91.00 .... f c-85.00 MHz fc-76.00 .... f c-68.00 MHz fc-88.00 MHz fc-72.00 MHz fc-44.00 MHz fc-36.00 MHz fc+70.00 .... 2000.00 MHz Group delay ripple Aperture 500 kHz 50.0 50.0 46.0 50.0 48.0 50.0 46.0 50.0 60.0 60.0 55.0 60.0 58.0 60.0 52.0 55.0 dB 15 ns 1216.00 ...... 1224.00 MHz In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 3 OF 4 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-3.Electronic characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = 20 c ... 70 c ZS= 200 ZL = 200 Min. fC IL min 3.5 Characteristic Centre Frequency Minimum Insertion Loss 1210.00 .... 1229.00 MHz Ripple in passband 1210.00 .... 1229.00 MHz Relative attenuation ( relative to IL min) Typ. 1220.0 Max. Units MHz 4.5 5.8 dB 1.0 3.0 dB rel 500.00 .... f C-91.00 MHz fC-91.00 .... fC-85.00 MHz fC-76.00 .... fC-68.00 MHz fC-88.00 MHz fC-72.00 MHz fC-44.00 MHz fC-36.00 MHz fC +70.00 .... 2000.00 MHz Group delay ripple Aperture 500 kHz 46.0 46.0 42.0 46.0 44.0 46.0 42.0 46.0 56.0 56.0 51.0 56.0 54.0 56.0 48.0 51.0 dB 40 ns 1210.00 ...... 1229.00 MHz iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. 3. 4. 5. 6. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 4 OF 4 |
Price & Availability of ACTF9001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |